DMX light effect bar with 2 rotating LED derbies, 2 LED spots and 2 Laser (RG/2M)
- Crossbar with integrated DMX control unit and stand sleeve
- Ultra-light ideally suited for mobile use
- Suited for installation on a speaker stand (not included) or truss
- Comes pre-assembled with practical transport bag
- 2 laser diodes project thousands of red and green laser beams
- Laser class 2M: does not require additional protective measures or appointment of a laser safety officer
- 2 rotating derbies for mirror ball effects with 4 bright 3W RGBW LEDs each
- 2 spots with 3 bright COB 8W RGBW LEDs (4in1) each
- Auto, music, master/slave and DMX mode
- 7 built-in auto and music show programs
- Direct color selection for 15 preset colors
- Stepless color blend, color change, color fade, dimmer and strobe effect
- Sound-control via built-in microphone with sensitivity control
- Supports QuickDMX - the wireless DMX system from Eurolite
- Built-in phantom-powered USB port for QuickDMX receivers (accessory)
- 3, 13 or 25 DMX channels selectable
- Addressing and setting via control panel with 4-digit LED display
- Convenient wireless control via included IR remote control Eurolite IR-7
- Additional rubber feet when the spot shall be positioned on the floor
- IEC terminals for power linking up to 8 units
- Switch-mode power supply for operation between 100 and 240 volts
- LED: Wash effect each with separate controlling 3 x COB (chip-on-board) 8 W 4in1 QCL RGBW (homogenous color mix)
- LED: Multi beam effect each with separate controlling 4 x high-power 3 W RGBW
- Can be operated in 3; 13; 25 CH mode
- The device is cooled by passive convection
- Controlling by DMX; IR remote control; Stand-alone; QuickDMX via USB (optional); Sound to light via Microphone built-in; Master/slave function
- Flicker-free projection
| Power supply: |
100-240 V AC, 50/60 Hz |
| Power consumption: |
40 W |
| IP classification: |
IP20 |
| Protection class: |
Class I |
| Power connection: |
Mains input IEC connector (M) mounting version Power supply cord with safety plug |
| Power output: |
IEC connector (F) mounting version |
| Fuse: |
Device fuse 5 x 20 mm, T 1 A Fuse replaceable |
| Lamp type: |
LED lamp |
| LED: |
Wash effect each with 3 x COB (chip-on-board) 8 W 4in1 QCL RGBW (homogenous color mix)
Multi beam effect each with 4 x high-power 3 W RGBW |
| Laser class: |
Class 2M |
| Laser color: |
RG |
| Laser module: |
R red 40 mW
G green 14 mW |
| DMX channels: |
3; 13; 25 |
| DMX input: |
3-pin XLR (M) mounting version |
| DMX output: |
3-pin XLR (F) mounting version |
| Cooling: |
Passive convection |
| Control: |
DMX; IR remote control; Stand-alone; QuickDMX via USB (optional); Sound to light via Microphone built-in; Master/slave function |
| Beam angle: |
18° |
| Beam angle (1/2 peak): |
18° |
| Beam angle (1/10 peak): |
34 |
| Housing color: |
Black |
| Display type: |
4 digits 7-segment LED display |
| Dimensions: |
Width: 62,5 cm
Depth: 15,5 cm
Height: 22,9 cm |
| Weight: |
4,3 kg |
| Remote control |
| Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese (provided) |
| Legal specifications |
| Ecodesign regulation: |
yes |
| Special product: |
Not designed for household room illumination |
| intended use: |
show effect lighting |
| Shipping weight: |
5,80 kg
|
| Dimensions(LxWxH)
( Length × Width × Height ):
|
35,00 × 67,00 × 17,00 cm |
Product safety information
Manufacturer information:
Steinigke Showtechnic GmbH
Andreas-Bauer-Str. 5
97297 Waldbüttelbrunn, Deutschland
https://www.steinigke.de/support
info@steinigke.de
There are no reviews yet.
